Product List
Order by phone 770-834-9149 or email at info@aaparks.com. Online ordering coming soon!
Featured Products
CRC200 Harness
With three sizes, color coded for easy identification, the Robertson CRC200 Harness is perfect for commercial zip line tours, canopy tours, and aerial adventure/trekking parks. The CRC200 Harness is third party tested to ASTM-F 1772 standards 12.1.3 & 12.1.2
ANSI z359 standard of a 5,000 lbs (22 kN) static tensile strength and PRCA/ANSI 1.0-1.3
Webbing width 1.75in. and 0.083 thickness
Tensile strength exceeds 5,000 lbs.
Adjustable buckles made from heat treated AMS 2759 Hardness 1E to Rc38-42
Cadmium Plating (electrodeposited) AMS-QQ-P-416 Cl.1 Ty.1
Includes cypress structural loop around the rear of the belt, designed to provide a second clip in position for the participant
-Cypress loop is a 5,000 lb structural loop often referred to as a tether.
Cypress Chest Harness
Commercial grade harness acceptable for use in engineered zip line tours, canopy tours, and aerial adventure/trekking parks
Independently reviewed and third party tested to ASTM-F 1772 standards 12.1.3 & 12.1.2
ANSI z359 standard of a 5,000 lbs (22 kN) static tensile strength and PRCA/ANSI 1.0-1.3
Webbing width 1.75in. and 0.083 thickness
Tensile strength exceeds 5,000 lbs.
Adjustable buckles made from heat treated AMS 2759 Hardness 1E to Rc38-42
Cadmium Plating (electrodeposited) AMS-QQ-P-416 Cl.1 Ty.1
Includes cypress structural loop around the rear of the belt, designed to provide a second clip in position for the participant
-Cypress loop is a 5,000 lb structural loop often referred to as a tether.
Large Zip Tour Pulley
-
Option available with body only
-
Optional handles and hang plates
-
Preferred trolley to fly in the prone (superman) position
-
Customizable for 3/8"-1” sheave
-
Upgradable options with spin-free bearings
-
Utilizes dual bearing system ideal for longer lines
SR71-B
-
Rockwell case hardened 56-58 steel
-
Sealed ball bearings
-
Excellent for challenging outdoor environments
-
Built for to ⅜, ½, ⅝, ¾,” diameter cable
-
NFPA 1983-2012 Section 7.6.5.4 Pulley Performance Requirements- General Use
-
Minimum 3 sigma breaking strength (3σ MBS) of not less than 36 kN (8,093 lbs)
-
Independent test rated to 19,000 Lbs.
-
Tested to NFPA 1938-2012 Class G, exceeds ANSI and OSHA standards
Fixed Lanyard
-
Standard Abrasion Color for the 910 is RED. If any other color is desired put in the notes.
-
1 3/4 Webbing from 10″ up to 216″ in length
-
Lanyards are used for protection on high ropes courses, adventure courses, and industrial heights.
-
These are designed to meet the standards of high ropes course protection and many industrial requirements
-
Used for positioning and safety lanyards provide light weight and superior strength.
-
Please contact and or leave in order comments the length you would like your fixed lanyards.
-
Robertson Harness’s Standard of Measurement on Lanyards is ” INSIDE of Soft Eye to INSIDE of Soft Eye”